PG&E Plug Load Workshop | DENT Instruments

May 18, 2017

Join the Pacific Energy Center at their upcoming Plug Load Workshop in San Francisco!

When: May 18, 2017, 8:30am – 4:30pm

Where: PG&E Pacific Energy Center, 851 Howard Street, San Francisco

Cost: FREE! Registration required.

This workshop will explore plug load density in commercial buildings with an eye toward understanding and limiting this load type. The instructional team will look at available research on expected plug-load density and compare the values that designers use with measured plug load power from actual facilities. Training will also present monitoring best practices for plug loads and identify tools available in the PEC’s Tool Lending Library, like the DENT ELITEpro XC, that can be used for these studies. The training will also emphasize strategies that can be used to reduce plug-load power, especially at ZNE facilities.

Topics to be covered in the presentation:

  • • Measurement and analysis methodologies for plug loads
  • •  Guidance on the design and operation of plug loads, including appropriate estimations of plug load power density, annual energy use, and 24-hour operation profiles
  • •  Strategies for reducing plug load energy including implementation of plug load controllers

This training will include a number of hands-on activities designed to emphasize the concepts covered.

DENT Announces BTL Acceptance of PowerScout 3 Plus Meters | DENT Instruments

DENT Instruments, a global leader in the design and manufacture of power and energy measurement instruments, announces that the PowerScout 3 Plus Power Meter has been certified by independent testing labs to have met or exceeded equipment interoperability guidelines of one of the industry’s leading standards agencies, BACnet Testing Laboratory (BTL).

“We recognize that the BTL mark is becoming an increasingly common requirement,” says Christopher Dent, President of DENT Instruments. “We are very excited to announce that the PowerScout 3 Plus has passed rigorous BTL testing. Our customers in the building automation market, including system integrators, can be confident that the PowerScout 3 Plus is fully interoperable with third-party BACnet devices.”

Ideal for new construction or building recommissioning, the PowerScout 3 Plus instruments are dependable single-point submeters for precise energy measurement. Paired with flexible and easy-to-mount RoCoil CTs or traditional split-core style CTs, the DENT PowerScouts provides accurate and cost-effective energy measurement for a wide range of building submetering projects.

DENT Instruments is a leading supplier of an array of precision measurement instrumentation and analytical software in the field of energy management.

Announcing BTL Acceptance of the PowerScout 48 HD

We are proud to announce that the PowerScout 48 HD has been certified by an independent testing lab to have met or exceeded equipment interoperability guidelines of one of the industry’s leading standards agencies, BACnet Testing Laboratory (BTL).

The BTL mark has become an important standard within the metering industry and PowerScout 48 meter users can be confident that the meter has based rigorous BTL testing to ensure that the meter is fully interoperable with third-party BACnet devices. BACnet communications, as well as Modbus, are standard on every PowerScout 48 HD.

Ideal for data centers, new construction, or building recommissioning, the PowerScout 48 HD meters are dependable, multi-channel submeters for precise energy measurement.

WANT TO LEARN MORE? CONTACT OUR SALES TEAM TODAY!

DENT and Setra Systems Announce Joint Development Partnership | DENT Instruments

DENT Instruments, a global leader in the design and manufacture of power and energy measurement instruments, today announced their Joint Development agreement with Setra Systems, Inc., a leading designer and manufacturer of sensors and display monitors for HVAC and building automation systems. DENT and Setra will continue their collaboration on a series of Joint Development projects that will help tackle some of the challenges faced by their served customer base. The Joint Development agreement brings together two leading manufacturers of building automation sensors to expand the market and help customers address the challenges of energy management.

Christopher DENT, President of DENT Instruments, said, “We are pleased to be working with Setra to develop state-of-the-art instrumentation that meets the energy measurement and management needs of our customers. Setra is a global leader in building sensor technology with a dominant position in the industry. We intend to leverage the technical strengths of both our respective companies to deliver new products that are both innovative and cost-effective.”

The Joint Development is part of Setra’s strategy to expand their energy management solutions offering to their current customer base. The project will leverage the technical, engineering, and commercial expertise of the two companies to identify opportunities to innovate and provide solutions for the industry’s greatest challenges. “Setra is excited to work with DENT to develop innovative solutions which help our customers reduce their energy consumption and become more efficient,” says David Carr, General Manager of Setra. “Roughly 65% of the world’s energy is consumed in buildings, so this is a great opportunity to leverage each company’s strengths to provide solutions to energy management issues of today and tomorrow.”

ABOUT DENT INSTRUMENTS

DENT Instruments designs and manufactures data loggers and energy records for today’s energy professionals. DENT’s products are often the first step in developing strong energy strategies, for maintaining peak operations, and for lowering operating costs. For over 25 years, DENT Instruments has built a reputation for providing instruments of the highest quality whose robust design, small size, and remote data acquisition make them the loggers of choice for companies large and small. DENT Instruments is headquartered in Bend, Oregon and is a locally-owned and managed business, and is a key contributor to the economic health and well-being of Central Oregon.

ABOUT SETRA SYSTEMS

Setra Systems designs and manufactures a broad line of sensing products. This includes humidity, current, vacuum, and pressure sensing instruments, low pressure calibrators, and weighing and counting scales for a wide variety of applications in the HVAC/R, Semiconductor, Test & Measurement, Medical, Pharmaceutical, Barometric, Vacuum, and Industrial markets. Setra has been designing and manufacturing sensor instruments and products since 1967, and we are dedicated to lean manufacturing, standard processes, and continuous improvement.

Setra delivers exceptional customer service, engineering expertise, and technical support to reduce development risks, improve the understanding of deign issues, and quickly identify the right solutions. Decades of application engineering experience provides the perspective and knowledge to quickly prototype, build, and deliver components, sub-assemblies, or systems exactly to a customer’s critical requirements.

Setra headquarters and manufacturing facility is located in Boxborough, MA. Setra Systems is a wholly owned subsidiary of Danaher Corporation.

DENT Announces Collaboration with Emerson | DENT Instruments

DENT Instruments, a global leader in the design and manufacture of power and energy measurement instruments, along with Emerson, a recognized leader in bringing technology and engineering together, have announced a strategic collaboration, making wireless power measurement a reality.

In an ongoing effort to improve equipment reliability and customer ease of use, DENT Instruments has combined their revenue-grade PowerScout 3037 Power Meter with Emerson’s Smart Wireless technology to provide a superior measurement solution that will greatly impact energy efficiency and sustainability for a vast array of customer markets.

“DENT’s versatile PowerScout Meters coupled with Emerson’s WirelessHART technology and global reach creates a much-needed energy information solution for our mutual commercial and industrial customers,” remarked Christopher Dent, President of DENT Instruments. “The DENT – Emerson partnership is a perfect blend of complementary technologies that brings increasingly important energy information to the world.”

This DENT-Emerson joint solution provides customers the following:

  • “Easy to install” design and mounting features support plug-and-play deployment in new or existing WirelessHART® mesh networks;
  • Measurement of over twenty energy variables are available to meet users’ needs;
  • Optimized connectivity for 99.999% data reliability via WirelessHART’s self-organizing, self-healing mesh network technology; and
  • Highly secure network communication via data encryption, critical key management, and end-to-end security features

The new Wireless Power Meter monitors voltage, current, power, energy, and other electrical parameters on single and three-phase electrical systems with revenue-grade accuracy. Continuously monitoring electricity consumption and power quality at submeter levels enables more granular energy management and effective monitoring.

“The introduction of the Power Meter to building maintenance, data centers, processing, industrial automation, cold chain, and more, will have a significant impact as it measures energy at the point of consumption,” says Ken Russell, President of Therm-O-Disc. “We are enabling customers to better understand their power usage quality and therefore improve their energy efficiency. The list of markets and industries that would benefit from using the Power Meter is long, and the benefits are substantial.”

Power Meter customer trial devices are available now through Emerson’s Therm-O-Disc business unit. For more information, visit them online at www.tod.com.

ABOUT DENT INSTRUMENTS

DENT Instruments designs and manufactures power meters and data loggers for today’s energy professionals. DENT’s products are often the first step in developing strong energy strategies, for maintaining peak operations, and for lowering operating costs. For over 25 years, DENT Instruments has built a reputation for providing instruments of the highest quality whose robust design, small size, and remote data acquisition make them the loggers of choice for companies large and small.

DENT Instruments is headquartered in Bend, Oregon and is a locally-owned and managed business, and is a key contributor to the economic health and well-being of Central Oregon.

ABOUT EMERSON

Emerson, based in St. Louis, Missouri (USA), is a global leader in bringing technology and engineering together to provide innovative solutions for customers in industrial, commercial, and consumer markets around the world. The company is comprised of five business segments: Process Management, Industrial Automation, Network Power, Climate Technologies, and Commercial & Residential Solutions. Sales in fiscal 2015 were $22.3 billion. For more information, visit www.Emerson.com.

ABOUT THERM-O-DISC

Therm-O-Disc, part of Emerson Climate Technologies, is a leader in the design and manufacturer of sensors and controls for multiple industrial and consumer industries. The company’s product line includes a broad range of specialized sensing capabilities, including bimetal and NTC temperature, differential pressure, relative humidity, thermal cutoffs, and wireless communications. Therm-O-Disc is headquartered in Mansfield, Ohio. For more Information, visit www.tod.com

ELOG 19 Launch

DENT Instruments is excited to be launching updated ELOG 19 software.

Stay up to date with the latest ELOG software for your ELITEpro XC, SP, and legacy products. ELOG 19 includes a number of visual enhancements and stability improvements, making it the best ELOG yet. Download it for FREE on the DENT website here!

ELOG 19 is compatible with Windows 10, Windows 8, and Windows 7. It is not compatible with MacOS. Please contact our technical support group for compatibility or installation questions.

Announcing the All-New PowerScout™ HD Series Multi-Circuit Power Meters

ADD UP TO 48 SINGLE-PHASE/16 THREE-PHASE METERS BY INSTALLING A SINGLE DEVICE

Announcing the all-new PowerScout™ HD Series Multi-Circuit Power Meters. Designed to monitor multiple independent loads from a single meter, the PowerScout HD Series makes it easy to add many revenue-grade metering points without having to purchase, mount, wire and commission individual energy meters, resulting in lower overall installation & commissioning costs.  The PowerScout HD solution provides revenue-grade accuracy in a wide variety of large building environments including data centers, hospitals, office buildings, campuses, retail centers, and industrial complexes.

TWO HD MODELS TO SUIT ANY INSTALLATION

One size doesn’t fit all, which is why the PowerScout HD comes in two sizes: PowerScout 12 HD has 12 circuit channels while the PowerScout 48 HD has 48 circuit channels. Both meters can be used on any combination of single- or three-phase installations and are available in a “circuit board only” or enclosure style options.

Need to monitor two different panels in the same electrical room? No need to purchase two separate meters: The PowerScout 48 HD features a unique, two independent voltage input design, which allows it to be used on two different voltage services simultaneously (each up to 600V).

MINIMUM PART NUMBERS, MAXIMUM FEATURES

Keep it simple: Don’t fight with a long list of SKUs only to realize an important feature is missing. All PowerScout HD Series Meters are equipped with smart, standard features like the flexibility to switch between Modbus® or BACnet®, Ethernet or Serial (RS-485), or the ability to use any millivolt CT, including Rogowski coils, on any channel.  When installed, the platform agnostic PowerScout HD Series meter easily integrates within connected products of any building management system (BMS) software, models equipped with BACnet® and Modbus® protocols and can be easily utilized with any system.

EASY CONFIGURATION

Meter setup is simple, thanks to included ViewPoint HD (Windows-based) software. Simply connect the meter to a PC using a standard USB or Ethernet cable. ViewPoint HD features a visual meter configuration with CT picker, waveform capture (54 channel oscilloscope), harmonics, and phasor plot (which can indicate phase rotation). Save time in the field: Pre-configure the meter for deployment at the office and clone configurations to program multiple meters quickly.

Don’t have ViewPoint HD software installed? The PSHD Web App is built right into the meter and is a browser-based interface which allows for meter configuration and displays real-time values.

The optional LCD also provides real-time value and meter configuration information at your fingertips. Scroll through metered values for each channel and obtain valuable setup information without the need to connect to a PC.

REVENUE GRADE ACCURACY

The PowerScout HD Series meets strict ANSI 12.20-2010 Class 0.2 accuracy requirements, making it ideal for revenue grade applications, such as tenant submetering. Maximize end-to-end accuracy by pairing the PowerScout 48 HD meter with a variety of revenue-grade CT options, including compact split cores or flexible, rope-style Rogowski coils (RoCoils) which can be used on services up to 4000A.

INDUSTRY-STANDARD COMMUNICATIONS

The PowerScout 48 HD supports both Modbus and BACnet communication protocols. Communication interface can be accomplished through standard serial RS-485 or Ethernet using either Modbus, BACnet MS/TP, Modbus TCP, or BACnet IP data formats. Positive and negative Modbus registers/BACnet objects make the PowerScout 48 HD ideal in bi-directional (renewable) metering environments. In addition, the PowerScout 48 HD features two pulse outputs which are designed to send energy consumption data to a data aggregator. A USB port is standard for easy meter configuration.

SEE HOW WE STACK UP TO THE COMPETITION
WANT TO LEARN MORE? CONTACT OUR SALES TEAM TODAY!

DENT Instruments Launches PowerScout 3 HD Submeters

PRESS RELEASE

DENT Instruments, a global leader in the design and manufacture of power and energy measurement instruments, announced the introduction of a new single-point submeter: The PowerScout 3 HD.

This updated meter, which replaces all models of the PowerScout 3037, monitors voltage, current, power, energy, and many other electrical parameters on single or three-phase systems.  This single-circuit meter builds upon the already successful multi-circuit 12 & 48 channel HD meter family.

The PowerScout 3 HD is equipped with several key, new features including a USB port for quick setup and a display for diagnostics and reading real-time values, which can be an invaluable troubleshooting tool in the field. In addition to Modbus and BACnet communications, Serial RS-485 and Ethernet communications are standard on all models. Easily toggle between communication methods, protocols, and other parameters in the field using the USB port and ViewPoint HD software. The ViewPoint HD G.U.I. offers the user the same features, setup, and configuration as our 12 & 48 channel multi-circuit meters which provides a seamless transition from the old platform of the PS3037.  The PowerScout 3 HD meets ANSI C12.20-2015 Class 0.2 revenue grade standards for accuracy and can be paired with a variety of revenue-grade current sensors making it the ideal meter for applications where accuracy is paramount.

The PowerScout 3 HD is available in two product configurations to match a variety of site requirements. Users can choose a DIN-Rail Mount enclosure (PS3HD-R-D-N), which is designed to be placed inside a separate enclosure near the service to be measured. Or, they may select a Wall Mount enclosure (PS3HD-C-D-N) which features built-in conduit connections and can be mounted directly on the wall near the electrical panel.

Kevin Pack, Director of Sales and Marketing at DENT Instruments said, “The PowerScout 3 HD is the newest recent addition to our submetering lineup and brings our single-point meter to the HD platform. With an identical register list, it’s now even easier to add a single-point meter to ecosystems where PowerScout 12 HD and PowerScout 48 HD meters are currently operating. All PowerScout HD meters can utilize the full range of DENT split core or RōCoil (Rogowski) current transformers, are line-powered, and can be used on a wide range of voltage services up to 600VAC.”

The PowerScout HD Series networked power meters are designed to provide timely and accurate consumption data to gain the upper hand on electrical costs in today’s escalating energy market. PowerScout HD meters can capture kWh/kW energy and demand data as well as virtually all relevant energy parameters for diagnostics and monitoring on three-phase or single-phase circuit installations. The PowerScout HD’s flexibility, size, and ease-of-use make them ideal tools for gathering detailed consumption data in commercial, industrial, government, and retail environments.

DENT Instruments is the leading supplier of an array of precision measurement instrumentation and analytical software in the field of energy management.  For over 30 years, DENT has specialized in helping customers manage energy costs and since 1988, DENT has provided the highest quality instruments that are the the preferred choice for energy management professionals workers worldwide.

DENT Selected as the ACI Vendor of the Year

DENT Instruments is honored to have been selected as the Automation Components, Inc. (ACI) Vendor of the Year for 2018!

DENT was one of five nominees for this award. According to Ryan Gaulke, Director of Purchasing at ACI, “The criteria used in making this determination was excellent quality, on-time delivery, and customer service. But what set DENT above the rest was our relationship with one another. DENT truly felt like an extension of our business and we are glad to be on your team!”

“DENT Instruments is justifiably proud to have been selected as the Automation Components’ Vendor of the Year for 2018,” says Christopher DENT, President of DENT Instruments. “All companies strive to provide the high-quality, delivery, and service that ACI has found with DENT but what sets us apart from others, as noted by ACI, is that we see our role not as a vendor or supplier, but rather as a strategic partner where we recognize that our partner’s success is our success and we work toward that mutual goal.”

DENT Instruments looks forward to continuing to support ACI with reliable instruments, fast shipping times, and superior customer service into 2019 and beyond.

AEE World 2020 Expo | DENT Instruments

September 23-24, 2020

DENT will be exhibiting at the AEE World Conference & Expo at the Colorado Convention Center in Denver, CO this September 23-24, 2020. Get a FREE EXPO PASS and see DENT in Booth #716.

About the Expo: A wide range of industry-leading companies present and demonstrate energy efficient products, energy management services, and solutions. Find your next vendor or business partner at AEE World Expo.

About the Conference: The conference is your chance to learn about the latest developments from business, industry and government sectors. It also provides you with multiple opportunities for networking with your peers, or meeting with potential vendors and business partners.

Get your FREE EXPO PASS and see us in Booth #1466!

Learn more about the event here: AEE World Conference & Expo

AHR Expo | DENT Instruments

January 30 – February 1, 2017

DENT will be exhibiting at the AHR Expo, the world’s largest HVACR marketplace, in Las Vegas this January 30-February 1, 2017. See us in Booth 1071!

The International Air-Conditioning, Heating, Refrigerating Exposition (AHR Expo), which started 85 years ago as a heating and ventilation show, has grown into the HVACR event of the year and is held in major cities across the U.S. The 2017 Show will be in Las Vegas, hosting more than 2,000 exhibitors and attracting crowds of 60,000 industry professionals from every state in America and 150 countries worldwide. It provides a unique forum designed expressly for the HVACR community, allowing professionals to get together to share new products, technologies, and ideas. The AHR Expo is co-sponsored by ASHRAE and AHRI, and is held concurrently with ASHRAE’s Winter Conference.

Learn more about the event here: http://www.ahrexpo.com/

See DENT in booth 1071 and download a free expo pass here: FREE TICKET

AHR 2019 | DENT Instruments

January 14-16, 2019

DENT will be exhibiting at the AHR Expo at the Georgia World Congress Center in Atlanta, GA this January 14-16, 2019. Get a FREE EXPO PASS and see DENT in Booth #C5330.

The AHR Expo is the world’s largest HVACR event, attracting the most comprehensive gathering of industry professionals from around the globe each year. The Show provides a unique forum where manufacturers of all sizes and specialties, whether a major industry brand or innovative start-up, can come together to share ideas and showcase the future of HVACR technology under one roof. Since 1930, the AHR Expo has remained the industry’s best place for OEMs, engineers, contractors, facility operators, architects, educators and other industry professionals to explore the latest trends and applications and to cultivate mutually beneficial business relationships. 

Get your FREE EXPO PASS and see us in Booth #C5330!

Learn more about the event here: https://ahrexpo.com/

AHR 2020 | DENT Instruments

February 3-5, 2020

DENT will be exhibiting at the AHR Expo at the Orange County Convention Center in Orlando, FL this February 3-5, 2020. Get a FREE EXPO PASS and see DENT in Booth #1466 in the Building Automation and Control Showcase area.

The AHR Expo is the world’s largest HVACR event, attracting the most comprehensive gathering of industry professionals from around the globe each year. The Show provides a unique forum where manufacturers of all sizes and specialties, whether a major industry brand or innovative start-up, can come together to share ideas and showcase the future of HVACR technology under one roof. Since 1930, the AHR Expo has remained the industry’s best place for OEMs, engineers, contractors, facility operators, architects, educators and other industry professionals to explore the latest trends and applications and to cultivate mutually beneficial business relationships. 

Get your FREE EXPO PASS and see us in Booth #1466!

Learn more about the event here: https://ahrexpo.com/

Energy Exchange 2017 | DENT Instruments

August 15-17, 2017

DENT will be exhibiting at the Energy Exchange 2017 in Tampa, FL this August 15-17, 2017. Register for the trade show here, which includes not only the trade show, but access to training sessions, keynote addresses, and networking events! See DENT in Booth #204.

The Energy Exchange is an educational and networking forum for those seeking to expand their knowledge of building operations, energy security, and management in the federal sector. With more than 350,000 buildingas and 600,000 vehicles on the road, the federal government is the nation’s largest energy consumer. Federal agencies have a tremendous opportunity and an obligation to reduce energy, water, and petroleum use, as well as greenhouse gas emissions in their operations.

Now in its third year, the Federal Energy Management Program’s Energy Exchange offers 2.5 days of training and open dialogue to help federal agencies meet and track their energy-related requirements and goals.

Attend the show and learn how DENT Instruments can play a role in your energy measurement strategy today.

Register here and see us in Booth #204!

Learn more about the event here: https://www.2017energyexchange.com/

GLOBALCON Expo | DENT Instruments

March 22-23, 2017

DENT will be exhibiting at the GLOBALCON Expo in Philadelphia, PA this March 22-23, 2017. Download a free expo pass and see us in Booth 507!

Decision makers from business, industry, and government must now seek integrated energy solutions – solutions which assure both a secure and affordable energy supply to meet today’s and tomorrow’s needs, and effective management of energy and overall operational costs. The GLOBALCON Expo will emphasize four critical areas of leading edge technology and services.

  • •  Energy Management, HVAC, and Smart Building Systems
  • •  Renewables, Alternative Energy, and Onsite Generation
  • •  Lighting Efficiency and Integrated Energy Solutions
  • •  Plant and Facilities Management

See how DENT Instruments can play a role in your energy strategy in 2017 and beyond. Download a FREE EXPO PASS and see us in Booth #507!

Learn more about the event here: http://www.globalconevent.com/

POWER-GEN | DENT Instruments

December 13-15, 2016

DENT will be exhibiting at POWER-GEN International, the world’s largest power generation event, in Orlando, Florida this December 13-15, 2016.

As the world’s largest power generation event, POWER-GEN International is the industry leader in providing comprehensive coverage of the trends, technologies, and issues facing the generation sector. More than 1,400 companies from all sectors of the industry exhibit each year to benefit from the exposure to more than 20,000 attendees. Displaying a wide variety of products and services, POWER-GEN International represents a horizontal look at the industry with key emphasis on new solutiosn and innovations for the future.

Learn more about the event here: http://www.power-gen.com/

See DENT in booth 727 and download a free expo pass here: FREE TICKET

WEEC Trade Show | DENT Instruments

September 21-22, 2016

DENT is excited to be exhibiting at the World Energy Engineering Congress (WEEC), a premier event to be held at the Walter E. Washington Convention Center in Washington, DC.

The World Energy Engineering Congress (WEEC) is the largest energy conference and technology expo held in the U.S. specifically for business, industrial and institutional energy users. It brings together the top experts in all areas of the field to help you set a clear, optimum path to energy efficiency, facility optimization and sustainability.

Learn more about the event here: http://www.energycongress.com/

See DENT in booth 508

WEEC Trade Show | DENT Instruments

September 21-22, 2016

DENT is excited to be exhibiting at the World Energy Engineering Congress (WEEC), a premier event to be held at the Walter E. Washington Convention Center in Washington, DC.

The World Energy Engineering Congress (WEEC) is the largest energy conference and technology expo held in the U.S. specifically for business, industrial and institutional energy users. It brings together the top experts in all areas of the field to help you set a clear, optimum path to energy efficiency, facility optimization and sustainability.

Learn more about the event here: http://www.energycongress.com/

See DENT in booth 508

West Coast EMC 2017 | DENT Instruments

The West Coast Energy Management Congress (EMC) is the largest energy conference and technology expo hold on the U.S. West Coast specifically for business, industrial, and institutional energy users. It brings together the top experts in all areas of the field to help you set a clear, optimum path to energy efficiency, facility optimization, and sustainability. The focus is on:

  • Energy Management, HVAC, and Smart Building Systems
  • Renewables, Alternative Energy, and Onsite Generation
  • Lighting Efficiency and Integrated Energy Solutions
  • Plant and Facilities Management

See how DENT Instruments can play a role in your energy strategy in 2017 and beyond. Download a FREE EXPO PASS and see us in Booth #220! Learn more about the event here: http://www.energyevent.com/

WEEC 2017 | DENT Instruments

September 27-29, 2017

DENT will be exhibiting at the World Energy Engineering Congress (WEEC) at the Georgia World Congress Center in Atlanta this September 27-29, 2017. Get a free Expo pass here and see DENT in Booth #501. The World Energy Engineering Congress (WEEC) is the largest energy conference and technology expo held in the U.S. specifically for business, industrial, and institutional energy users. It brings together the top expoerts in all areas of the field to help you set a clear, optimum path to energy efficiency, facility optimization, and sustainability. WEEC focuses on:
  • Energy Management, HVAC, and Smart Building Systems
  • Renewables, Alternative Energy, and Onsite Generation
  • Lighting Efficiency and Integrated Energy Solutions
  • Plant and Facilities Energy Efficiency and Management
This year’s featured guest will be President George W. Bush, founder of the George W. Bush Presidential Center. Get your FREE EXPO PASS and see us in Booth #501! Learn more about the event here: http://www.energycongress.com/