 |
A Dependable and Versatile Tool to Measure Your Energy
Usage
The ELITEpro SP is a
complete solution for pinpointing electric usage and quantifying energy usage.
It is capable of measuring, storing, and analyzing electrical consumption data
which is derived from the voltage and current inputs. The ELITEpro SP uses
direct connections to each phase of the voltage and various interchangeable CT
options such as spit-core current transformers, or flexible RoCoils (for large
loads or large cables and bussbars) to monitor current on each
phase.
These meters can
capture kWh/kW energy and demand data as well as virtually all relevant energy
parameters for diagnostics and monitoring on three-phase or single-phase
circuit installations. Electrical load diagnostic parameters, such as power
factor (both Apparent and Displacement), are captured in addition to energy and
demand values.
The ELITEpro SP's flexibility, size, and ease-of-use
make them ideal tools for gathering detailed consumption information in
commercial, industrial, government, and retail environments.
COMMUNICATIONS OPTIONS
NEW! STANDARD ETHERNET PORT
Every ELITEpro
SP instrument now includes an Ethernet port in addition to the standard USB.
Connect directly to the ELITEpro SP via the included A-to-B USB cable. Or, have
the ELITEpro SP on your local area network for convenient remote data download.
Supports 10/100 MB Ethernet over Cat 5 or better and can be configured for DHCP
or static IP. Schedule automatic data downloads from the logger using AutoPoll
software (included with ELOG). Reconfigure the ELITEpro SP for a new project
without leaving your workstation. View Ethernet Performance Update
here.
NEW! OPTIONAL BLUETOOTH® WIRELESS
TECHNOLOGY
Save time and meet safety requirements by communicating
with an ELITEpro SP without removing the electrical panel door. In addition to
the standard USB and Ethernet ports, ELITEpro SP instruments may be equipped
with an optional Bluetooth® wireless technology interface, which
will allow a Bluetooth-enabled PC running ELOG to connect to the
ELITEpro SP over short distances (up to 100 feet, depending on interference) to
send setup tables or download data. Includes USB and Ethernet ports.
Bluetooth-enabled PC must support Serial Port Profile (SPP). View
Bluetooth® Performance Update
here.
NEW!
OPTIONAL WI-FI INTERFACE
Need a meter on your local area
network but do not have a network connection near by? The ELITEpro SP's
optional Wi-Fi interface allows the meter to be connected to a Wi-Fi network
and accessed from any PC on the network using ELOG software. Alternatively,
configure the ELITEpro SP as its own Wi-Fi hotspot and view real-time data
using a Wi-Fi enabled PC, tablet, or smart phone via a web browser from up to
150 ft away. Available as two separate models*: with an internal antenna or
with an external antenna. Includes USB and Ethernet ports. View Wi-Fi
Performance Update
here.
*Note: ELITEpro SP loggers
that are equipped with a Wi-Fi package contain an internal antenna. An external
antenna is optional. You may toggle between using the internal and external
antenna (if it is available on your logger) by checking or unchecking the Use
External Antenna checkbox in ELOG.
|
