ELOG 2009 is Launched! November 2009

ELOG 2009 is the seventh generation of DENT's ELITEpro/DATApro logger software. If you're a regular user of ELOG software, you will appreciate the new features along with many other "behind-the-scenes" changes that are incorporated into this new version.

Recently upgrade to Windows 7 or Vista? ELOG 2009 is fully compatible with both operating systems.

Click here to learn more about ELOG 2009.

The RoCoil mV Series of Flexible Current Transformers are Available Now, May 2009

DENT’s RoCoil mV™ are a new line of flexible Rogowski Coil CTs. They complement DENT’s existing CTs that are compatible with the ELITEpro/DATApro data loggers.These CTs offer significant advantages over conventional Split Core or Clamp-On CTs in certain installations. They offer “installer-friendly” features such as large window size, light weight, wide current range, and mechanical flexibility for mounting in tight quarters. RoCoils provide accurate, non-intrusive measurement of AC current combined with easy placement around cable bundles, large bus bars and irregular shaped conductors.

For more information, click here...

The PowerScout™ Series Instruments are Now Available, February 2009

The NEW PowerScout products are permanent-mount submeters that can communicate energy and power values to an upstream energy management or building automation/controls system via Modbus communications protocol over RS-422/485. The PowerScout is currently available in a "3" and "18" channel version. For more details, visit the PowerScout page on our website by clicking the link below.

For more information, click here...

Line-Powered ELITEpro Option Now Available, November 2007

DENT's ELITEpro can now be powered from one of the phases of the service beingmeasured. The Line-Powered ELITEpro option eliminates the need for external power at the job site and avoids draining precious battery power and the one-minute sampling rate during battery operation. The Line-Powered ELITEpro option is available on all new ELITEpros and as an upgrade to existing instruments. Contact the Factory or your local Distributor for details and be sure to read the Line-Powered ELITEpro Performance Update below.

Line-Powered ELITEpro Performance Update (PDF)

The New SMARTloggers are Here! May 2006

Small and faster than before, the third generation SMARTloggers are the easy way to monitor, present and analyze energy consumption data for a variety of electrical equipment.

Download a PDF of the New SMARTlogger Press Release.

Learn more about SMARTloggers here.