Data Logger Meters | Data Loggers & Power Energy Audit Monitors -- Sitemap
Data Logger Meters | Data Loggers & Power Energy Audit Monitors
Data Logger Meters | Data Loggers & Power Energy Audit Monitors
Data Logger Meters | Data Loggers & Power Energy Audit Monitors
Data Logger Meters | Data Loggers & Power Energy Audit Monitors
                       

 Call 1.800.388.0770

Home

Get a Quote

E-Newsletter Sign-up

Contact DENT

 Products

Product Overview

ELITEpro Energy Logger

DATApro Data Logger

SMARTlogger TOU

Current Transformers

Software/Communications

 News

Recent Press Coverage

New Products & Features

DATAline Newsletter

Upcoming Shows/Events

 Support

Frequently Asked Questions

Applications & Case Studies

Find a Distributor

Contact Support

 Company

About Us

Career Opportunities

Data Logger & Loggers
Data Logger & Loggers
Current Transformers



All of our current transformers are shunted, and therefore, safe compared to other commercially available CT's. Choose from three types: split-core, clamp-on, and flexible. All produce 333mV when at  full scale.





SPLIT-CORE CT's
Shown: 200 AMP Split-Core CT

 

CLAMP-ON CT's
Shown: 500 AMP Clamp-On CT

 

FLEXIBLE CURRENT SENSORS
Shown: 3000 AMP Flex CT

 

The DENT SC-Series are cost-effective CTs available in several window sizes and for 5A to 1,200A loads.

Standard features include:

  • Output is 333mV at rated current

  • Internal precision burden resistor across secondary

  • Leads-8ft. twisted pair

  • Epoxy encapsulated housing

  • Accuracy is measured from 10% to 130% of rated current

  • Shrouded core blades for protection during installation

  • Core interleaved at joints for accuracy

  • Phase angle is measured at 50% of rated current

  • Snap closing/opening feature

  • Accuracy = +/- 1%

  • Phase shift <2degrees

High Accuracy 5A CT features:

  • 1% of rated current

  • Phase shift <.5 degrees

  • Spring loaded core

  • Wide bandwidth 10Hz to 10KHz

  • Excellent low current sensitivity

  • ETL recognized per UL506

 

DENT CON-series CTs are specifically designed to offer broad utility in a compact shape. These CTs deliver high accuracy, high sensitivity, versatility, and low phase shift making these probes an excellent choice for use in a wide range of power measurement applications.

  • Current ranges include 2.0A to 150A; 10 to 600A; 10.0 to1200A AC

  • Output Signal: 333 mV @ Maximum Input

  • Working Voltage : 600Vrms

 

DENT’s FLN-Series 36-inch length “rope” type CTs are designed to take measurements where standard current sensors can't. Large buss bars, cable bundles, and irregular shaped conductors will no longer be a challenge.

  • Measure from 10 Amps to 3000,

  • Working voltage = 1000V rms max.,

  • 36 inches in length,

  • Accuracy = 1 % of reading,

  • Remembers shape, allowing for pre-forming before use,

  • Very low phase shift error,

  • Dual range (switchable between 300A and 3000A),

  • Output = 333mV at 300A or 3000A,

  • Battery Life = 4000 hr's typical, 8000 hrs maximum. 

 

CON 150 AMP

CON 1000 AMP

 

Split-core printable spec sheets:

 

 

Clamp-on printable spec sheets:

 

Flex CT printable spec sheets:

         

Data Logger & Loggers

© 2007 DENT Instruments  |  64 NW Franklin Avenue  |  Bend, Oregon 97701  |  tel 541.388.4774  |  toll free 800.388.0770  |  fax 541.385.9333

           Home  |  About DENT Instruments  |  Product Overview  |  Applications & Case Studies  |  Recent Press  |  Freq. Asked Questions  |  Contact Support
                                        Get a Quote  |  Find a DENT Distributor  |  Contact DENT Instruments  |  E-Newsletter Sign-up  |  Career Opportunities

Internet-Website Marketing by Zsmart.com